REARS Micro-V Belt Conversion Kit

Features:

• The tensioning mechanism will not need adjustment for the life of a particular belt
• The unit is designed to maintain tension as the belt stretches
• Tensioner will indicates when it is time to replace a belt

Installing A New Belt:

• Use a 3/8" Ratchet in square hole to rotate tensioner
• Adjust pump in slot so tensioner has exactly 2/3 travel remaining
• Install new belt if the tensioner stop bottoms out when pump is dropped to its lowest point in slot
• Swing the tension arm out to install a new belt

Pulley color indicates which PSI range it may handle:

• Orange Pulley - 150 to 250 PSI
• Red Pulley - 200-300 PSI

(*NOTE = Both ranges listed above are for gearbox pumps)